Reference Guide

Cisco Prime Network Analysis Module Command Reference Guide Page 105
monitor rtp-stream threshold
To set the alarm threshold for the different RTP stream monitoring types, use the monitor
rtp-stream threshold command. To disable the alarm threshold RTP stream monitoring, use the
no form of this command.
monitor rtp-stream threshold <key_word>
no monitor rtp-stream threshold <key_word>
Syntax Description
Key Word
Action
actual-pkt-loss
Specifies the actual packet loss percentile threshold and
enables the actual packet loss threshold alarm.
adjusted-pkt-loss
Specifies the adjusted packet loss percentile threshold and
enables the adjusted packet loss threshold alarm.
jitter
Specifies the jitter alarm threshold and enables the jitter
threshold alarm in milliseconds.
mos
Specifies the MOS score threshold and enables the MOS
score alarm.
soc
Specifies the seconds of concealment threshold and
enables the soc alarm.
ssc
Specifies the severe seconds of concealment threshold and
enables the ssc alarm.
Syntax Description
Defaults
This command has no default settings.
Command Modes
Command mode
Usage Guidelines
This command is supported on all NAM platforms.