Manualshelf

Reference Guide

ManualsBrandsCisco ManualsInterface ModulesCisco Catalyst 6500 Series Firewall Services Module
101102103104105106107108109110
Cisco Prime Network Analysis Module Command Reference Guide Page 104
monitor rtp-stream filter
To set a RTP stream filtering entry, use the monitor rtp-stream filter command. To remove a RTP
stream filtering entry, use the no form of this command.
monitor rtp-stream filter source-address source-mask dest-address dest-mask
Syntax Description
source-address
Specifies the source address of the RTP stream being
filtered.
source-mask
Specifies the subnet mask of the source address of the
RTP stream being filtered.
dest-address
Specifies the destination address of the RTP stream
being filtered.
dest-mask
Specifies the subnet mask of the RTP stream being
filtered.
Syntax Description
Defaults
This command has no default settings.
Command Modes
Command mode
Examples
This example shows how to enable RTP stream filtering:
root@localhost# monitor rtp-stream filter 1.2.3.0 255.255.255.0 4.5.0.0 255.255.0.0
Related Commands
metric export host