Reference Guide

Cisco Prime Network Analysis Module Command Reference Guide Page 101
monitor nbar
To enable supervisor NBAR statistics polling, use the monitor nbar command. To disable polling,
use the no form of this command.
monitor nbar
no monitor nbar
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no defaults.
Command Modes
Command mode
Usage Guidelines
The NBAR-PD-MIB must be present to enable the collection of statistical information. The NAM-3
statistics are polled from the supervisor engine.
Examples
This example shows how to enable NBAR statistics polling:
[e-mail]# monitor nbar
Successful enable nbar collection.
[e-mail]# no monitor nbar
Successfully disable nbar collection.
This example shows how to display NBAR statistics polling:
[e-mail]# show monitor nbar
nbar collection enabled