Getting Started Guide

At-A-Glance
© 2013 Cisco and/or its affiliates. All rights reserved. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks.
Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Cisco Catalyst 3650 Series Fixed GE
Access Switch
The Cisco® Catalyst® 3650 Series Switch delivers converged wired and wireless
access on a single platform, creating an uncompromised user experience in any
workspace. The converged system provides a single platform for wired and wireless
networkwide visibility for faster troubleshooting, advanced security and quality of
service (QoS) control, maximum resiliency with fast stateful recovery, and scale with
distributed wired and wireless data plane.
Cisco Catalyst 3650 Highlights
• Built on Cisco Unified Access Data Plane (UADP) application-specific integrated
circuit (ASIC) with programmability to support Cisco ONE Enterprise Networks
Architecture and software-defined networking (SDN)
• Integrated wireless LAN controller functionality
• Native Flexible NetFlow (FnF) on all ports
• Granular, hierarchical bandwidth management
• Cisco TrustSec® support
Cisco Catalyst 3650 Primary Features
• Integrated wireless LAN controller capability with:
- Up to 40G of wireless capacity per switch (48-port models)
- Support for up to 25 access points and 1000 wireless clients on each switch or
stack
• 24 and 48 10/100/1000 data and Power over Ethernet Plus (PoE+) models with
Energy-Efficient Ethernet (EEE)
- Optional Cisco StackWise®-160 technology provides scalability and resiliency
with 160 Gbps of stack throughput (for additional wired and wireless capabilities,
please visit the Cisco Catalyst 3850 Series Switches page)
- Fixed, built-in 4 x Gigabit Ethernet, 2 x 10 Gigabit Ethernet, or 4 x 10 Gigabit
Ethernet Small Form-Factor Pluggable (SFP) and SFP+ uplink ports
- Dual redundant power supplies and three modular fans, providing higher redundancy
- Full IEEE 802.3at (PoE+) with 30W power on all ports in 1 rack unit (RU) form factor
• Software support for IPv4 and IPv6 routing, multicast routing, modular QoS, FnF
Version 9, and advanced security features
• Single, consistent Cisco IOS® XE Software image across all license levels, providing
an easy upgrade path for access points and software features
• Enhanced limited lifetime warranty (E-LLW) with next business day (NBD) advance
hardware replacement and 90-day access to Cisco Technical Assistance Center
(TAC) support
Switch Configurations
The Cisco Catalyst 3650 Series Switches are available in LAN Base, IP Base, and IP
Services feature sets. All switches ship with a default AC power supply. A DC power
supply can be purchased as an option or spare. The base switch does not include
any access point licenses. Figure 1 shows the Cisco Catalyst 3650 Series. Table 1
compares different switch models.
Figure 1. Cisco Catalyst 3650 Series Switches (Front and Back)
Table 1. Model Comparison for Cisco Catalyst 3650 Series Switches
Model Total GE
Ethernet Ports
Default AC
Power
Available
PoE Power
Uplinks
WS-C3650-24TS 24 250 WAC – 4 x Gigabit
Ethernet with SFP
WS-C3650-48TS 48
WS-C3650-24PS 24 PoE+ 640 WAC 390 W
WS-C3650-48PS 48 PoE+
WS-C3650-48FS 48 PoE+ 1025 WAC 775 W
WS-C3650-24TD 24 250 WAC – 2 x 10 Gigabit
Ethernet with
SFP+ (or 4 x
Gigabit Ethernet
with SFP)
WS-C3650-48TD 48
WS-C3650-24PD 24 PoE+ 640 WAC 390 W
WS-C3650-48PD 48 PoE+
WS-C3650-48FD 48 PoE+ 1025 WAC 775 W
WS-C3650-48TQ 48 250 WAC – 4 x 10 Gigabit
Ethernet with
SFP+ (or 4 x with
SFP)
WS-C3650-48PQ 48 PoE+ 640 WAC 390 W
WS-C3650-48FQ 48 PoE+ 1025 WAC 775 W