Troubleshooting Guide

The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live,
make sure that you understand the potential impact of any command.
Conventions
For more information on document conventions, refer to the Cisco Technical Tips Conventions.
How to View and Understand CAST Traces
These sections provide information to help you view and interpret CAST traces.
View the CAST Trace
From the Start menu, open the
Cisco VT Advantage Diagnostics
window. As shown in Figure 1, there
are three buttons, labeled Update Status, CDP Viewer, and CAST Viewer, at roughly 6:00 in this dialog
box:
Figure 1
–
Diagnostics Window
Page
2
of
7
Cisco
-
VT Advantage: Troubleshoot Video Problems with Traces
11/17/2005
http://www.cisco.com/warp/customer/788/AVVID/trace_vt.html