Technical Manual

NCNA
YES
default − Network Calling Name Allowed? − yes
NCRD NO
default − Network Call Redirection Allowed? − no
CHTY
BCH
Channel Type − BCH, could be ABCH
CTYP
UKWN default − Call Type for outgoing direct dialed TIE
route− Unknown, could be INTL, NXX, ...
INAC NO default − Insert ESN Access Code to incoming
private network call? − no
ISAR NO default − Integrated Service Access Route denied?
− no
TGAR 1 Trunk Group Access Restriction − 0−31, 1 in this
case
BCOT 0
default − B−channel Overload Control Timer − 0
DSEL
VOD default − Data Selection − Voice or Data Route
VOD
PTYP PRI
Port Type at far end − PRI, could be ATT, ACO, ...
AUTO NO default − Auto−Terminate? − no, terminate
normally.
DNIS NO
default − ACD DNIS route?
DCDR NO default − Include DNIS in CDR records? related to
ACD− no
ICOG IAO Incoming and/or Outgoing trunk − IAO, could be
ICT, OGT
SRCH LIN default − Linear Hunting Search Method for
outgoing trunk member − LIN, could be RRB
TRMB
YES
default − Tromboning allowed? − yes
STEP default − Alternate trunk route for outgoing trunks
− " ", could be 0−511
ACOD
8815 Access code for the trunk route − 8815 − see note
above
TCPP NO default − CPP flag for incoming non−ISDN trunk
call tandemed to this trunk − no
PII NO
default − Calling Privacy Indicator Ignored? − no
TARG 01 Trunk Access Restriction Group − match "TGAR"
− 1
CLEN 1
default − Calling Line ID entry number − 1
BILN NO
default − Billing Number required? − no
ABS default − Actual Outgoing toll digits to be ignored
for code restriction − " ", could be 0−9.
INST
default − Insert − " " = no digits are entered