Technical Manual

OVL000
Call Routing Configuration
>LD 21 load overlay module 21 to print a Route Data Block
report
PT1000
REQ PRT
@ Request prompt, entered "PRT" to print
TYPE:
RDB @ Type prompt, entered "RDB" for Route Data
Block
CUST 0 Customer number − 0 get operator "x", 1 get "Y",
...
ROUT 115 Route Number − 0−127, 0−511 − 115, matches
Terminal Block Number above
TYPE
RDB
Route Data Block
CUST 00
Customer number − 0
ROUT 115
Route Number − 115
DES
CISCO
description
TKTP TIE
type of trunk − TIE, could be DID ..., see LD 14
ESN NO default − Electronic Switched Network pad
control? − no
CNVT NO
default − Conventional switch route? − no
SAT NO
default − Satellite used for trunk route?
RCLS
EXT
default − Route Class marked as external?
DTRK
YES
Digital Trunk Route? − yes
DGTP PRI Digital Trunk Type for route − PRI, could be BRI
...
ISDN YES
ISDN? − yes
MODE
PRA Mode of operation − PRA, could be ISLD ..., see
LD16
IFC ESS5 Interface Type for this PRI route − ESS5, could be
S100, D100, ...
SBN NO
default − Send Billing Number?
PNI 00000
default − Private Network Identifier?, see LD16
SRVC
NNSF default − Service type provisioned − No Network
Specific Facility NNSF, could be M800, IWAT, ...