Technical Manual

PARM RS422 DTE
default − physical interface type
DRAT 64KC
default − physical interface rate
CLOK EXT
default − physical interface clocking
NASA NO default − Network Attendant Service
Allowed?
IFC ESS5
Interface − aka "switch type"
SIDE USR
IDSN "side" − i.e. either USR or NET
CNEG 1
default − Channel Negotiation Option
RLS ID 36
release ID of the switch at the far end of
the D−channel − 36, use 23 for SL1 <−>
SL1
RCAP ND2 Remote D−channel Capabilities − name
display 2
T200 3
default − retransmission Timer
T203 10 default − max Time secs without frames
being exchanged
N200 3 default − max Number of
retransmmissions
N201 260 default − max Number of octets in
information field
K 7 default − max Number of outstanding
frames
REQ ****
type **** to exit overlay module 22
OVL000
B Bearer Channel Configuration
>LD 20 load overlay module 20 to print a
Terminal Number Block report
PT0000
REQ: PRT @ Request prompt, enter "PRT" to
print
TYPE: TNB @ Type prompt, enter "TNNB" for
Terminal Number Block
TN 115 1
@ TN prompt, enter:
"115" to specify Terminal Number
Block − aka "loop" # 115 aka PRI
card 115
"1" to specify B−channel #1, could be
1−23
SPWD
DATE