- [IN]PLACE Air Cleaner User Manual

Cisco BTS 10200 Softswitch T.38 Fax Relay
H.323 Trunk Group Profile
15
Cisco BTS 10200 Softswitch T.38 Fax Relay Support
H.323 Trunk Group Profile
The H.323 Trunk Group Profile (h323-tg-profile) table defines the characteristics of each H.323 trunk.
A h323-tg-profile id must be created in this table before H.323 trunk group entries can be added.
Table Name: H323-TG-PROFILE
Table Containment Area: Call Agent
Command Types Show, add, change, and delete
Examples • show h323-tg-profile id=[e-mail]
• add h323-tg-profile id= ras-tg; ras=n;
• change h323-tg-profile id= ras-tg; ras=y;
• delete h323-tg-profile id= ras-tg;
Usage Guidelines Primary Key Token(s): id
Add Rules: FK constraints.
• If fax-pref-mode=FAX-T38-CAMODE, then fax-t38-camode-supp=Y;
• If fax-pref-mode=FAX-INBAND, then fax-inband-supp=Y;
Change Rules: FK constraints.
Delete Rules: FK constraints.
Token Properties Table 3 lists the token properties that were added to this command for T.38 Fax Relay.
Table 4 T.38 Fax Relay Tokens
Token Values
FAX-T38-CAMODE-SUPP
CA-controlled T.38 fax relay in
real time (CA instructs GW
when to switch to T.38 mode).
Y/N (Default = Y)
FAX-INBAND-SUPP Y/N (Default = N)
FAX-PREF-MODE
Designates preferred mode of
T.38 fax relay for this gateway.
FAX-T38-CAMODE—This is the default value.
FAX-INBAND—Possible only for G.711 and G.726. supported by
MGX 8260.