Manual

snmp trap { enable | suppress} HenbgwAccessServiceStop [ target <trap_collector>]
snmp trap { enable | suppress} HenbgwMMESCTPAllAssocDown [ target <trap_collector>]
snmp trap { enable | suppress} HenbgwMMESCTPAllAssocDownClear [ target <trap_collector>]
snmp trap { enable | suppress} HenbgwMMESCTPAssocDown [ target <trap_collector>]
snmp trap { enable | suppress} HenbgwMMESCTPAssocUp [ target <trap_collector>]
snmp trap { enable | suppress} HenbgwNetworkServiceStart [ target <trap_collector>]
snmp trap { enable | suppress} HenbgwNetworkServiceStop [ target <trap_collector>]
Notes:
•
<trap_collector> is the name of the 1st trap target. It is a string of size 1 to 31.
•
There are several additional SNMP Traps which can be configured. Refer Global Configuration Mode
chapter of the Command Line Interface Reference for more information.
•
For more information on SNMP Traps, refer System SNMP-MIB Reference.
•
Repeat this configuration as needed for additional traps.
SNMP MIB Traps for HeNB-GW Service
SNMP traps are used to manage and monitor the service on HeNB-GW node.
Supported SNMP traps and its id are indicated in the following table.
Table 4: SNMP Traps and Object Ids
Object IdTraps
starentTraps 513starThreshHENBGWHenbSessions
starentTraps 514starThreshClearHENBGWHenbSessions
starentTraps 515starThreshHENBGWUeSessions
starentTraps 516starThreshClearHENBGWUeSessions
starentTraps 517starThreshHENBGWPagingMessages
starentTraps 518starThreshClearHENBGWPagingMessages
starentTraps 1193starHenbgwAccessServiceStart
starentTraps 1194starHenbgwAccessServiceStop
starentTraps 1195starHenbgwNetworkServiceStart
starentTraps 1196starHenbgwNetworkServiceStop
starentTraps 1227starHenbgwMMESCTPAssocUp
starentTraps 1228starHenbgwMMESCTPAssocDown
starentTraps 1229starHenbgwMMESCTPAllAssocDown
starentTraps 1230starHenbgwMMESCTPAllAssocDownClear
HeNB-GW Administration Guide, StarOS Release 19
54
HeNB-GW Service Configuration Procedures
SNMP MIB Traps for HeNB-GW Service