Manual

◦
Error Indication functionality for allowing a proper error reporting/handling in cases where
no failure messages are defined.
◦
Overload function for indicating the load situation in the control plane of the S1 interface.
◦
Load balancing function for ensuring equally loaded MMEs within an MME pool area.
◦
S1 Setup functionality for initial S1 interface setup for providing configuration information.
◦
eNodeB and MME Configuration Update functions are to update application level
configuration data needed for the eNodeB and MME to inter operate correctly on the S1
interface.
•
S1 UE context Release Function: This functionality is responsible to manage the release of UE
specific context in the eNodeB and the MME.
•
UE Context Modification Function: This functionality allows to modify the established UE
Context partly.
•
Status Transfer: This functionality transfers Packet Data Convergence Protocol (PDCP) SN Status
information from source eNodeB to target eNodeB in support of in-sequence delivery and
duplication avoidance for intra LTE handover.
•
Trace Function: This functionality is to control a trace session recording for a UE in
ECM_CONNECTED or to control an MDT (Minimization of Derive Tests) session transferring
MDT measurements collected by the UE.
•
Location Reporting: This functionality allows MME to be aware of the UE's current location.
•
Warning Message Transmission Function: This functionality provides the means to start and
overwrite the broadcasting of warning message.
•
RAN Information Management (RIM) Function: This functionality allows the request and
transfer of RAN information (For example, GERAN system information) between two RAN nodes
via the core network.
•
Configuration Transfer Function: This functionality allows the request and transfer of RAN
configuration information (For example, SON information) between two RAN nodes via the core
network
Features and Functionality - Base Software
This section describes the features and functions supported by default in base software on HeNB-GW service
and do not require any additional license to implement the functionality with the HeNB-GW service.
Following features and supports are discussed in this section:
•
AAA Server Group Support, on page 14
•
Access Control List Support, on page 14
•
Bulk Statistics Support, on page 15
•
Congestion Control and Management Support, on page 16
•
DSCP Marking on S1-U Relay, on page 17
HeNB-GW Administration Guide, StarOS Release 19
13
HeNB Gateway in Wireless LTE Network
Features and Functionality - Base Software