Manual

oneP Communication
Connected Apps Sessions
SecGW Administration Guide, StarOS Release 17
46
configure
connectedapps
ca-certificate-name cert_name
ha-chassis-mode inter
ha-network-mode L2
rri-mode BOTH
sess-ip-address ip_address
sess-name session_name
sess-passwd { encrypted | password } password
sess-userid username
activate
ip_address may be specified in IPv4 dotted-decimal or IPv6 colon-separated-hexadecimal format.
For a complete description of these command keywords, see the Global Configuration Mode Commands and Connected
Apps Configuration Mode Commands chapters of the Command Line Interface Reference.
Activating a Client Connected Apps Session
Important: You must configure HA Mode on each VPC-VSM instance before activating a client CA session via
StarOS.
To activate a CA session with the IOS-XR oneP server execute the following StarOS command sequence:
configure
connectedapps
activate
For a complete description this command, see the Global Configuration Mode Commands and Connected Apps
Configuration Mode Commands chapters of the Command Line Interface Reference.
For additional information on IOS-XR commands, refer to ASR 9000 user documentation.