Manual

SecGW Service Creation
SecGW Configuration Sequence ▀
SecGW Administration Guide, StarOS Release 17 ▄
29
SecGW Configuration Sequence
The configuration sequence for enabling an SecGW is as follows:
 Create a crypto template with the desired IPSec functions. See Crypto Templates.
 Create Access Control Lists. See Access Control Lists.
 Enable and configure one or more WSG services. See WSG Service Configuration.
 Configure required IPSec features. See IPSec Configuration.
For additional information, see the sample configurations provided in this guide.
Important: SecGW (WSG service) must be separately enabled and configured on each VPC-VSM instance.
There are four CPUs on the VSM; each CPU runs a separate instance of VPC-VSM.