Manual

HTTPError Tracking User Guide

The custom time range interface opens and displays the currently selected overall

time range. As shown in the following figure, when the overall time range is

last24hours, the full width of the interface represents those 24hours.

This display is referred to as dailymode, and is also used when the overall time

range is last6hours. For that time range, only the final 6hours are unshaded to

show that they represent the current overall time range.

When the overall time range is last48hours, the full width represents 7days

(weeklymode). When the overall time range is last7days or more, the full width

represents 2months (monthly mode).

In the following table, which defines the characteristics of each mode, the inform-

ation in each column is as follows:

Span displayed—The span of time within which you can set the timerange

Marked increments—The interval of time represented by each dot at the

bottom of the interface (not all dots are necessarily numbered)

Settable range—The minimum and maximum time range you canset

Minimum increment—The smallest increment by which you can increase

or decrease thesetting

Mode

Span dis-

played

Marked incre-

ments

Settable range

Minimum incre-

ment

Daily 24 hours 1 hour 1 – 24 hours 1 hour

Weekly 7 days 6 hours 1 hour – 7 days 1 hour