Instruction manual

Administrator Procedures

INTER-TEL

5000 ADMINISTRATOR GUIDE – Issue 2.3, September 2007

Trunk Programming

Page 47

6. When finished with all programming, press while the ENTER DATABASE OPTION

prompt is displayed. This ends the programming session.

7. If a system reset is required, the display shows ENTER SYS RESET OPTION. Do one

of the following:

• Delayed Reset: Press or the

DELAYED menu button to delay the reset. The dis-

play shows

DELAYED RESET SCHEDULED. The system will be reset at the pre-

programmed time.

• Immediate Reset: Press or the

IMMEDIATE menu button to reset the system

now.

NOTICE

Possible interruption of calls in progress. When the system is Reset, all

calls in progress are dropped immediately.