Instruction manual

Reference
INTER-TEL
®
5000 ADMINISTRATOR GUIDE – Issue 2.3, September 2007
Page 324 Diagnostics Feature Codes
Diagnostics Feature Codes
The Diagnostics Mode feature code (9900) [9100 in Europe] must be entered at the administra-
tor’s endpoint to enable system diagnostic mode before the feature codes summarized in
Table 53 can be used.
Table 53.
Diagnostics Feature Codes
Feature Name
Code
U.S. [Europe]
Definition
Compression On/Off 9982
[9182]
Compresses call processing messages sent
to DB Programming, speeding up transfers.
You should not disable this feature unless
instructed to do so by Inter-Tel personnel.
Compression Statistics 9981
[9181]
Dumps various statistics related to the DB
Programming compression algorithm. This
feature should be used only when directed to
do so by Inter-Tel personnel.
Diagnostic –
ASAI Snoop Off
9926
[9126]
Turns off the ASAI output to Message Print.
ASAI is the protocol the system uses to talk to
DB Programming and the AVDAP. Turning
this feature on helps the Inter-Tel Engineers
debug the messaging between Call Process-
ing and DB Programming or Call Processing
and the AVDAP.
Diagnostic –
ASAI Snoop On
9927
[9127]
Turns on the ASAI output to Message Print.
ASAI is the protocol the system uses to talk to
DB Programming and the voice processing
system. Turning this feature on helps the
Inter-Tel Engineers debug the messaging
between Call Processing and DB Program-
ming or Call Processing and the AVDAP.
Diagnostic –
Dump Extension
9922
[9122]
Allows an Inter-Tel field technician to dump a
device or structure when debugging a prob-
lem. The system dumps the internal data
structures for that extension to message print.
If you press the pound button (#) you are
prompted for a command. The command
allows you to enter an alphanumeric string of
the structure to dump.