Instruction manual

Reference
INTER-TEL
®
5000 ADMINISTRATOR GUIDE – Issue 2.3, September 2007
Administrator Feature Codes
Page 323
Modem Reset 9869 Resets the internal modem; used when the
modem fails to answer an incoming call or
to synchronize with an external modem.
Night Ring On/Off 9860 Places system in night mode or cancels
night mode. While in night mode, the night
toll and trunk restriction lists are used.
Periodic Diagnostics
On/Off
9825 Periodic diagnostics extends and improves
the functionality and checks and reconcilia-
tions performed on various resources in the
system.
Program System Speed
Dial
9801 Programs system-wide Speed Dial numbers
when followed by location codes (000–999).
Set Network Date/Time 9810 Programs the time and date for all nodes in
the system. (Local time and date can also
be reset by individual nodes.)
Set Time/Date 9800 Programs system time and date.
Synchronize Network Time 9811 Synchronizes the minutes past the hour
across the network.
If a node's time is off by more than 30 min-
utes, synchronizing the minutes may cause
the hour to change. Also, network time is
automatically synchronized every day at
12:30 AM (00:30), using the time setting on
the node with the lowest number.
Table 52. Administrator Feature Codes (Continued)
Feature Name
Code
U.S. [Europe]
Definition
NOTICE
Database corruption could occur if the
modem is reset during a DB Program-
ming session. Inter-Tel recommends
that you assign the modem extension
to a Speed Dial button.