Instruction manual

Reference
INTER-TEL
®
5000 ADMINISTRATOR GUIDE – Issue 2.3, September 2007
Endpoint Feature Codes
Page 317
Automatic IC Access On/Off 361 (Not used on single line endpoints) Allows the
endpoint user to determine how ringing inter-
com calls will be answered: simply by lifting
the handset (automatic answer), or by lifting
the handset and pressing the IC button (or a
Call button, if there is no IC button).
Automatic Trunk Answer 350 Using this feature code, endpoint users with
allowed answer can pick up trunks that are
ringing into the system, but that are not actu-
ally ringing at their endpoints. This feature
does not pick up transferred calls or recalls
that are ringing at the endpoint.
Background Music On/Off 313 (Not used on single line endpoints) Turns on
and off background music heard through the
endpoint speaker.
Barge-In 386 Allows the supervisor to barge-in on a call to
help the hunt group member/agent.
Call Forward All Calls 355 Immediately forwards all calls to another end-
point or to an outside endpoint number. (Inter-
Tel endpoints use the FWD button.)
Call Forward If Busy 357 Immediately forwards all calls to another end-
point or to an outside endpoint number when
the endpoint is in use.
Call Forward If No Answer 356 Forwards all calls to another endpoint or to an
outside endpoint number if not answered
within a predetermined time.
Call Forward If No Answer/Busy 358 Forwards all calls to another endpoint or to an
outside endpoint number if not answered
within a predetermined amount of time, or
immediately if the endpoint is in use.
Call Logging 333 Allows users of display endpoints to view
missed, received, and dialed calls.
Change Language 301 An endpoint user can change the assigned
language for the endpoint by entering the
Change Language feature code while the end-
point is idle.
CO Hookflash 330 Sends a timed hookflash over the trunk while
on an outside call (includes conference calls).
Conference 5 Connects from three to four parties in a con-
ference. A conference consists of any combi-
nation of inside and outside parties. (Inter-Tel
endpoints use the CNF button.)
Data 340 Allows operation of a data device attached to
a digital endpoint. Requires a modem-
equipped data device. Supported on Inter-Tel
5000 systems equipped with appropriate digi-
tal interface equipment.
Table 51. Endpoint Feature Codes (Continued)
Feature Name Code Definition