Instruction manual

System Features
INTER-TEL
®
5000 ADMINISTRATOR GUIDE – Issue 2.3, September 2007
Page 234 Redial
The Last Number Saved and Last Number Dialed features work differently depending on the
station status when it is used, as shown in Individual endpoint programming determines the
mode of the Redial feature, either Last Number Dialed or Last Number Saved. The Redial fea-
ture code (380) performs the Redial function and is programmed under the button.
Non-display System Speed Dial numbers cannot be redialed at a display endpoint.
Table 31.
Redial Interactions
Endpoint Status When
User
Activates Redial
Endpoint Programmed for
Last Number Saved
Endpoint Programed for
Last Number Dialed
Idle Saves the last trunk access
code and phone number that
was dialed.
A trunk is selected using the
same trunk access code as
used to place last outside call,
and the last phone number is
dialed.
Intercom dial tone (on- or
off-hook)
Saves the last trunk access
code and phone number that
was dialed.
A trunk is selected using the
same trunk access code as
used to place last outside call,
and the last phone number is
dialed.
On an intercom call Releases the current call,
seizes a trunk using the saved
trunk access code, and dials
the saved phone number.
Releases the current call,
seizes a trunk using the access
code used on the last outside
call, and dials the last phone
number dialed.
After selecting a trunk but
before dialing
Redials the saved phone num-
ber on the currently selected
trunk, instead of the saved
trunk access.
Redials the last phone number
dialed, using the currently
selected trunk.
After selecting a trunk
and dialing one or more
digits
Releases the current call,
seizes a trunk using the saved
trunk access code, and dials
the saved phone number.
Releases the current call,
reseizes the trunk (using the
access code used on that call),
and redials the digits that were
dialed.
On an incoming outside
call
Releases the current call,
seizes a trunk using the saved
trunk access code, and dials
the saved phone number.
Releases the current trunk,
seizes a trunk using the same
trunk access code used on the
last outgoing call, and dials the
last number dialed.
REDIAL