Instruction manual

System Features
INTER-TEL
®
5000 ADMINISTRATOR GUIDE – Issue 2.3, September 2007
Call Logging Displays on a Two-Line Display Endpoint
Page 171
Call Logging Displays on a Two-Line Display Endpoint
At any menu level, you can press the asterisk ( ) button to cancel or return to the previous
menu, or press the pound ( ) button to accept.
The following examples show Call Logging displays that appear on a two-line endpoint.
Main Menu
If you have a two-line display endpoint, use a feature code to access the Call Logs. When you
press the Special button (SPCL or infinity symbol) then enter the Call Logging feature code
(333), the following display appears. It prompts you to specify which Call Log you want to
access or if you want to clear all call logs.
Call Log Display
When one of the call menu options (Missed=1, Received=2, or Dialed=3) is selected in the
main menu, a display similar to the one below appears.
Scrolling Through Entries
To scroll through the entries, press the Volume Up button to scroll forward, or press the Vol-
ume Down button to scroll backward.
Deleting Entries
To delete the entry, press . The display shows the next entry in the list or returns to the
main menu, if the list is empty.
To delete all entries, press .
Placing a Call
To place a call, press
the pound ( ) button.
#
LOG TYPE: MISS=1
RCV=2 DL=3 CLR=4
4809619000 JOHN
FR AUG 20 11:53A
If both the calling number and Caller ID
name are available, the first line contains the
number and as much of the name as possi-
ble. If neither the calling number nor Caller ID
name is available, UNKNOWN CALLER is
displayed.
OR
4809619000
FR AUG 20 11:53A
If the calling number is available, but the
Caller ID name is not available, the first line
contains only the calling number.
0
4
#