Instruction manual

Hardware and Endpoints
INTER-TEL
®
5000 ADMINISTRATOR GUIDE – Issue 2.3, September 2007
Page 100 Digital Endpoint Flashing Light Indicators
A digital endpoint user can set up a conference and then, once it is established, press the
(Special button) and Speaker (or press and enter the Enhanced Speakerphone
feature code, 310) to have an enhanced speakerphone call in the conference.
Digital Endpoint Flashing Light Indicators
Table 17 summarizes digital endpoint LED flash rates in interruptions per minute (IPM).
∞
∞
Table 17. Inter-Tel Digital Endpoint LED Flash Rates
Steady
0 IPM
Slow
30 IPM
Medium
120 IPM
Fast
240 IPM
Flutter
60/960 IPM
CALL
Call is active
at your sta-
tion.
(Green LED*)
Call is recall-
ing from hold
or transfer.
(Green LED*)
Call or queue
callback is
ringing in or
camped on
(waiting).
(Green LED*)
Call is on
hold.
(Green LED*)
CNF
Conference is
in progress.
(Green LED*)
Conference is
recalling your
station.
(Green LED*)
A conference
party is on
conference
wait hold.
(Green LED*)
DND
Your station
is in Do-Not-
Disturb.
(Red LED)
FWD
Calls are
being for-
warded.
(Red LED)
HUNT
GROUP
All stations in
Hunt Group
are unavail-
able.
(Red LED)
Hunt group
has a call
camped on.
(Red LED)
IC
Intercom call
is in progress.
(Green LED*)
Recalling
intercom call is
camped on.
(Green LED*)
Intercom call
is camped on
(waiting).
(Green LED*)
Intercom call
is on hold.
(Green LED*)
MSG
Station is in
alphanu-
meric mode.
(Red LED)
Message is
waiting.
(Red LED)
MUTE
Microphone
is muted.
(Red LED)
SPEAKER
Speaker-
phone is on
or ready for
use. Or, sta-
tion program-
ming is in
progress.
(Red LED)