Instruction manual

Hardware and Endpoints
INTER-TEL
®
5000 ADMINISTRATOR GUIDE – Issue 2.3, September 2007
Default Inter-Tel Endpoint Feature Buttons
Page 91
Default Inter-Tel Endpoint Feature Buttons
When the system is in the default state, all endpoints are in the same keymap group and have
the following feature buttons. Feature code descriptions start on page 113. The Special button
is signified with the infinity symbol ( ).
Table 15 summarizes the functions of endpoint feature buttons.
Table 15.
Feature Button Functions
Button Function
CALL BUTTONS 1–4 Selects an outgoing trunk, if idle, or answers a call on the button.
IC Selects a voice channel or picks up a holding or camped-on inter-
com call.
DND Programmable button 1: Do-Not-Disturb On/Off (372)
PROGRAMMABLE
BUTTONS 2–6, 14–16,
18, and 21–35
Undefined values. Can be programmed with any feature code, trunk
access code, or extension number, or can be programmed as an
endpoint extension or System Speed Dial bin.
CNF Programmable Button 7: Conference (5).
HOLD Programmable Button 8: Individual Hold (336).
TRANSFER Programmable Button 9: Transfer to Ring (345).
SYS SPD Programmable Button 10: System Speed Dial (381).
REDIAL Programmable Button 11: Redial (380).
PAGE Programmable Button 12: Page (7).
QUEUE Programmable Button 13: Queue Request (6).
MUSIC Programmable Button 17: Background Music (313).
PAGE ZONE 1 Programmable Button 19: Selects Page Zone 1 for making a page.
STN SPEED DIAL Programmable Button 20: Station Speed Dial (382).
FWD Call Forward All Calls (355) Also used for canceling Call Forward.
SPECIAL Signals the system to expect a feature code.
ANSWER Answer (351).
OUTGOING Selects a trunk for placing an outgoing call using the endpoint’s Out-
going Call feature (8).
SPEAKER Speakerphone On/Off.
MSG Message (365) – Also retrieves messages when the flashing MSG
button is pressed.
MUTE Microphone Mute On/Off (314). This is a fixed-function button on
digital endpoints
DATA Data (340).
STATION SPEED
DIAL BUTTONS 0–9
Used for storing and dialing one Station Speed Dial number each.
UNDEFINED Some endpoints may have several undefined buttons that can be
programmed as you want.
∞