Instruction manual

Hardware and Endpoints
INTER-TEL
®
5000 ADMINISTRATOR GUIDE – Issue 2.3, September 2007
Page 84 IP and SIP Endpoint Ports and Connectors
IP and SIP Endpoint Ports and Connectors
The ports and connectors on IP and SIP endpoints vary depending on the model number. The
following ports and connectors may be included on your endpoint:
• Headset Jack: Con-
nects to a headset.
• Handset Jack: Con-
nects to a handset.
• Combined Headset/
Handset Jack: Con-
nects to a headset or
handset.
• LAN/Power Jack:
Connects to an exter-
nal power supply (see
page 85).
• LAN/Power Jack:
Connects to a net-
work hub or a switch
• External Micro-
phone Jack: Allows
you to connect an
external microphone
to the endpoint.
(8690 only).
• External Speaker
Jack: Allows you to
connect an external
speaker to the end-
point (8690 only).
• Reset Button:
Resets the connec-
tion to the network
(8690 only).
• Compact Flash
(CF) Port: Allows
you to connect a CF
memory card if addi-
tional memory is needed (8690 only).
• Personal Computer Memory Card International Association (PCMCIA) Port:
Allows you to connect a PCMCIA memory card if additional memory is needed (8690
only).
• Universal Serial Bus (USB) Client Port: Connects the endpoint to a host computer
running ActiveSync
®
(8690 only).
• USB Host Port: Allows you to connect a keyboard, mouse, or other USB device to
your endpoint (8690 only).
Headset Jacks
PC Port
LAN/Power Jack
Model 8690
LEDs
Mic Spkr Reset Button
PC Ports
USB Host
USB Client
LAN/Power
PCMCIA
Compact Flash
Port