Instruction manual

Hardware and Endpoints
INTER-TEL
®
5000 ADMINISTRATOR GUIDE – Issue 2.3, September 2007
Page 82 IP Endpoint Flashing Light Indicators
DND
Endpoint is
in Do-Not-
Disturb.
FEATURE
2
The fea-
ture is in
use.
FWD
Calls are
being for-
warded.
HUNT
GROUP
All stations in
hunt group
are unavail-
able.
Hunt group
has a call
camped on.
IC
Intercom call
is in
progress.
Recalling
intercom call
is camped on
(waiting).
Intercom call is
camped on
(waiting).
An intercom
call is on hold
at the user’s
endpoint or
the user has
entered a
transfer fea-
ture code.
1
Mini-DSS
2
The pro-
grammed
endpoint in
busy or
unplugged.
The pro-
grammed
endpoint is
in DND.
The pro-
grammed
endpoint has
a call ring-
ing in.
Continuous
flutter indi-
cates that
the pro-
grammed
endpoint
was left off-
hook.
MSG
Endpoint is in
alphanu-
meric mode.
Message is
waiting.
MUTE
Microphone
is muted.
SPEAKER
Speaker-
phone is on
or ready for
use. Or, end-
point pro-
gramming is
in progress.
Model 8600:
Intercom,
recall, confer-
ence, camped
on, or trans-
ferred call is
ringing-in.
SPEED
DIAL
2
Designated
endpoint is
busy or
unplugged.
Designated
endpoint is in
DND.
Designated
endpoint has a
call ringing in.
Continuous
flutter indi-
cates that the
designated
endpoint was
left off hook.
Table 14. Flashing Light Indicators for IP and Multi-Protocol Endpoints (Continued)
Button
Steady
0 IPM
Slow
30 IPM
Medium
120 IPM
Fast
240 IPM
Flutter
60/960 IPM