Technical Manual

InterfaceDetermines the interface to which this access list is bound.♦
ActionDetermines the action type of the new rule. Two options are available. Permit allows
all matching traffic and Deny blocks all matching traffic.
♦
SourceThis field specifies the source of the traffic. This can be anything among a Single IP
address, a network, an interface IP address of the firewall or a network object group. These
can be selected with the Details button.
♦
DestinationThis field specifies the source of the traffic. This can be anything among a
Single IP address, a network, an interface IP address of the firewall or a network object
group. These can be selected with the Details button.
♦
ServiceThis field determines the protocol or service of the traffic to which this access list is
applied. You can also define a service−group that contains a set of different protocols.
♦
After you click the Details button, a new window that contains the existing Network Objects is
displayed. Select the inside−network, and click OK.
3.
You are returned to the Add Access Rule window. Type any in the Destination field. and click OK in
order to complete the configuration of the access rule.
4.