Technical Manual

You can select any protocol other than HTTP if required. If there is only a single protocol to be

selected, then there is no need to create the service group. It is useful to create a service group when

there is a requirement to identify numerous non−adjacent protocols to be matched by this access rule.

Choose Add > TCP service group in order to create a new TCP service group.

Note: In the same way, you can also create a new UDP service group or ICMP group and etc.

Specify a name for this service group, select the protocol on the left side menu, and click Add in

order to move them to the Members in Group menu on the right side. Numerous protocols can be

added as members of a service group based on the requirement. The protocols are added one by one.

After all the members are added, click OK.