Release Notes

7
Release Notes for Cisco ASDM, Version 6.7(x)
Unsupported Commands
The Cisco.com Authentication dialog box appears.
Step 3 Enter your assigned Cisco.com username and the Cisco.com password, and then click Login.
The Cisco.com Upgrade Wizard appears.
Step 4 Complete the upgrade wizard.
Step 5 For the upgrade versions to take effect, check the Save configuration and reload device now check box
to restart the ASA, and then restart the ASDM.
Step 6 Click Finish to exit the wizard and save the configuration changes that you have made.
Unsupported Commands
ASDM supports almost all commands available for the adaptive ASA, but ASDM ignores some
commands in an existing configuration. Most of these commands can remain in your configuration; see
Tools > Show Commands Ignored by ASDM on Device for more information.
This section includes the following topics:
• Ignored and View-Only Commands, page 7
• Effects of Unsupported Commands, page 8
• Discontinuous Subnet Masks Not Supported, page 8
• Interactive User Commands Not Supported by the ASDM CLI Tool, page 8
Ignored and View-Only Commands
Table 4 lists commands that ASDM supports in the configuration when added through the CLI, but that
cannot be added or edited in ASDM. If ASDM ignores the command, it does not appear in the ASDM
GUI at all. If the command is view-only, then it appears in the GUI, but you cannot edit it.
Table 4 List of Unsupported Commands
Unsupported Commands ASDM Behavior
capture Ignored.
coredump Ignored. This can be configured only using the CLI.
dhcp-server (tunnel-group name
general-attributes)
ASDM only allows one setting for all DHCP servers.
eject Unsupported.
established Ignored.
failover timeout Ignored.
fips Ignored.
pager Ignored.