Release Notes

Release Notes for Cisco ASDM, Version 6.7(x)

Upgrading the ASAand ASDM Software

This section describes how to upgrade to the latest version and includes the following topics:

• Viewing Your Current Version, page 6

• Upgrading the ASA and ASDM Images, page 6

For CLI procedures, see the ASA release notes.

Viewing Your Current Version

The software version appears on the ASDM home page; view the home page to verify the software version

of your ASA.

Upgrading the ASA and ASDM Images

This section describes how to install the ASDM and ASA images.

We recommend that you upgrade the ASDM image before the ASA image. You must upgrade the ASA

by copying files through the ASA CLI. You must use the 6.7(1) version of the ASDM image; you cannot

use another older version of the ASDM image with the ASA.

Note The VNMC does not support ASA image upgrade.

Upgrading Using ASDM 6.7(1)

Detailed Steps

Step 1 Back up your existing configuration. For example, choose File > Show Running Configuration in New

Window to open the configuration as an HTML page. You can also use one of the File > Save Running

Configuration options.

Step 2 Choose Tools > Check for ASA/ASDM Updates.

Service interface The service interface is the Ethernet interface associated with security profile interfaces. You

can only configure one service interface, which must be the inside interface.

We modified the following screen: Configuration > Device Setup > Interfaces.

VNMC policy agent The VNMC policy agent enables policy configuration through both the ASDM and VNMC

modes. It includes a web server that receives XML-based requests from Cisco VNMC over

HTTPS and converts it to the ASA 1000V configuration.

We modified the following screen: Configuration > Device Setup > Interfaces.

Table 3 New Features for ASA Version 8.7(1.1)/ASDM Version 6.7(1) (continued)

Feature Description