Leaflet

2-12
思科 ASA 系列命令参考，A 至 H 命令
第 2 章 acl-netmask-convert 至 application-access hide-details 命令
activation-key
以下是 activation-key 命令的示例输出，其中展示在新激活密钥不同于旧激活密钥时故障切换的
输出：
ciscoasa# activation-key 0xyadayada 0xyadayada 0xyadayada 0xyadayada 0xyadayada
Validating activation key.This may take a few minutes...
The following features available in the running permanent activation key are NOT available
in the new activation key:
Failover is different.
running permanent activation key: Restricted (R)
new activation key: Unrestricted (UR)
WARNING: The running activation key was not updated with the requested key.
Proceed with updating flash activation key?[y]
Flash permanent activation key was updated with the requested key.
以下是来自许可证文件的示例输出：
Serial Number Entered: 123456789ja
Number of Virtual Firewalls Selected: 10
Formula One device: ASA 5520
Failover : Enabled
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Security Contexts : 10
GTP/GPRS : Disabled
SSL VPN Peers : Default
Total VPN Peers : 750
Advanced Endpoint Assessment : Disabled
AnyConnect for Mobile : Enabled
AnyConnect for Cisco VPN Phone : Disabled
Shared License : Disabled
UC Phone Proxy Sessions : Default
Total UC Proxy Sessions : Default
AnyConnect Essentials : Disabled
Botnet Traffic Filter : Disabled
Intercompany Media Engine : Enabled
------------------------------------------
THE FOLLOWING ACTIVATION KEY IS VALID FOR:
ASA SOFTWARE RELEASE 8.2+ ONLY.
Platform = asa
123456789JA:yadayda1 yadayda1 yadayda1 yadayda1 yadayda1
------------------------------------------
THE FOLLOWING ACTIVATION KEY IS VALID FOR:
ALL ASA SOFTWARE RELEASES, BUT EXCLUDES ANY
8.2+ FEATURES FOR BACKWARDS COMPATIBILITY.
Platform = asa
123456789JA:yadayda2 yadayda2 yadayda2 yadayda2 yadayda2
相关命令
命令 说明
anyconnect-essentials
启用或禁用 AnyConnect Essentials 许可证。
show activation-key
显示激活密钥。
show version
显示软件版本和激活密钥。