Leaflet

15-9
思科 ASA 系列命令参考，A 至 H 命令
第 15 章 failover 至 fallback 命令
failover exec
以下示例展示使用 failover exec 命令向处于备用状态的故障切换对等设备发送配置命令时返回的
警告：
ciscoasa# failover exec mate static (inside,outside) 192.168.5.241 192.168.0.241
**** WARNING ****
Configuration Replication is NOT performed from Standby unit to Active unit.
Configurations are no longer synchronized.
ciscoasa(config)#
以下示例使用 failover exec 命令向备用设备发送 show interface 命令：
ciscoasa(config)# failover exec standby show interface
Interface GigabitEthernet0/0 "outside", is up, line protocol is up
Hardware is i82546GB rev03, BW 1000 Mbps
Auto-Duplex(Half-duplex), Auto-Speed(100 Mbps)
MAC address 000b.fcf8.c290, MTU 1500
IP address 192.168.5.111, subnet mask 255.255.255.0
216 packets input, 27030 bytes, 0 no buffer
Received 2 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
284 packets output, 32124 bytes, 0 underruns
0 output errors, 0 collisions
0 late collisions, 0 deferred
input queue (curr/max blocks): hardware (0/0) software (0/0)
output queue (curr/max blocks): hardware (0/1) software (0/0)
Traffic Statistics for "outside":
215 packets input, 23096 bytes
284 packets output, 26976 bytes
0 packets dropped
1 minute input rate 0 pkts/sec, 21 bytes/sec
1 minute output rate 0 pkts/sec, 23 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 21 bytes/sec
5 minute output rate 0 pkts/sec, 24 bytes/sec
5 minute drop rate, 0 pkts/sec
Interface GigabitEthernet0/1 "inside", is up, line protocol is up
Hardware is i82546GB rev03, BW 1000 Mbps
Auto-Duplex(Half-duplex), Auto-Speed(10 Mbps)
MAC address 000b.fcf8.c291, MTU 1500
IP address 192.168.0.11, subnet mask 255.255.255.0
214 packets input, 26902 bytes, 0 no buffer
Received 1 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
215 packets output, 27028 bytes, 0 underruns
0 output errors, 0 collisions
0 late collisions, 0 deferred
input queue (curr/max blocks): hardware (0/0) software (0/0)
output queue (curr/max blocks): hardware (0/1) software (0/0)
Traffic Statistics for "inside":
214 packets input, 23050 bytes
215 packets output, 23140 bytes
0 packets dropped
1 minute input rate 0 pkts/sec, 21 bytes/sec
1 minute output rate 0 pkts/sec, 21 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 21 bytes/sec
5 minute output rate 0 pkts/sec, 21 bytes/sec
5 minute drop rate, 0 pkts/sec