Manual

Command Purpose
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
13-14
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-30644-01
Chapter 13 Configuring RADIUS and TACACS+ Servers
Configuring and Enabling RADIUS
To disable accounting, use the no aaa accounting {network | exec} {start-stop} method1... global
configuration command.
Selecting the CSID Format
You can select the format for MAC addresses in Called-Station-ID (CSID) and Calling-Station-ID
attributes in RADIUS packets. Use the dot11 aaa csid global configuration command to select the CSID
format. Table 13-1 lists the format options with corresponding MAC address examples.
To return to the default CSID format, use the no form of the dot11 aaa csid command, or enter 
dot11 aaa csid default.
Note You can also use the wlccp wds aaa csid command to select the CSID format.
configure terminal En
ter global configuration mode.
aaa accounting network start-stop
radius
En
able RADIUS accounting for all network-related service requests.
ip radius source-interface bvi1 Con
figure the access point to send its BVI IP address in the
NAS_IP_ADDRESS attribute for accounting records.
aaa accounting update periodic mi
nutes Enter an accounting update interval in minutes.
end Return
to privileged EXEC mode.
show running-config V
erify your entries.
copy running-config startup-config (O
ptional) Save your entries in the configuration file.
Table 13-1 CSID Format Options
Option MAC Address Example
default 0007.85b3.5f4a
ietf 00-07-85-b3-5f-4a
unformatted 000785b35f4a