Manual

6-43
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-30644-01
Chapter 6 Configuring Radio Settings
Debugging Radio Functions
[no] debug dot11
{events | packets | forwarding | mgmt | network-map | syslog | virtual-interface}
The syntax is described in Table 6-5.
Ta b l e 6-5
Syntax Description
Syntax for debug dot11 Command
This example shows how to begin debugging of all radio-related events:
AP# debug dot11 events
This example shows how to begin debugging of radio packets:
AP# debug dot11 packets
This example shows how to begin debugging of the radio system log:
AP# debug dot11 syslog
This example shows how to stop debugging of all radio related events:
AP# no debug dot11 events
Note Debugging not enabled is the default of the command.
events Activates debugging of all radio related events
pack
ets Activates debugging of radio packets received and
transmitted
forwarding Activates debugging of radio forwarded packets
mgmt Activates debugging of radio access point
management activity
network-map Activates debugging of radio association
management network map
syslog Activates debugging of radio system log
virtual interface Activates debugging of radio virtual interfaces