Design Guide

80
Cisco Aironet 1520, 1130, 1240 Series Wireless Mesh Access Points, Design and Deployment Guide, Release 6.0
OL-20213-01
Connecting the Cisco 1520 Series Mesh Access Point to Your Network
(Cisco controller) > show ap config general AP_Name
Information similar to the following displays to the screen.
Verifying BGN Using the GUI
To verify BGN using the GUI, follow these steps:
Step 1 Click Wireless > Access Points > AP Name. the details window for the selected mesh access point
appears.
Step 2 Click the Mesh tab. Details for the mesh access point including BGN appears. (See Figure 47.)