Design Guide

Cisco Aironet 1520, 1130, 1240 Series Wireless Mesh Access Points, Design and Deployment Guide, Release 6.0

OL-20213-01

Connecting the Cisco 1520 Series Mesh Access Point to Your Network

Figure 45 Point-to-Multipoint Bridging

Using the GUI to Enable Ethernet Bridging

To enable Ethernet Bridging on a RAP or MAP using the GUI, follow these steps:

Step 1 Click Wireless > All APs.

Step 2 Click the AP name link of the mesh access point on which you want to enable Ethernet bridging.

Step 3 At the details window, select the Mesh tab. (See Figure 46.)

Figure 46 All APs > Details for (Mesh) Window

Step 4 Select either RootAP or MeshAP from the AP Role drop-down menu, if not already selected.

• MeshAP—Select this option if the AP1520 has a wireless connection to the controller. This is the

default setting.

148439