Design Guide
173
Cisco Aironet 1520, 1130, 1240 Series Wireless Mesh Access Points, Design and Deployment Guide, Release 6.0
OL-20213-01
Adding and Managing Mesh Access Points with Cisco WCS
Routing State The state of parent selection. Values that display
are seek, scan and maint. Maint displays when
parent selection is complete.
Malformed Neighbor Packets The number of malformed packets received from
the neighbor. Examples of malformed packets
include malicious floods of traffic such as
malformed or short DNS packets and malformed
DNS replies.
Poor Neighbor SNR The number of times the signal-to-noise ratio falls
below 12 dB on the backhaul link.
Excluded Packets The number of packets received from excluded
neighbor mesh access points.
Insufficient Memory The number of insufficient memory conditions.
RX Neighbor Requests The number of broadcast and unicast requests
received from the neighbor mesh access points.
RX Neighbor Responses The number of responses received from the
neighbor mesh access points.
TX Neighbor Requests The number of unicast and broadcast requests sent
to the neighbor mesh access points.
TX Neighbor Responses
The number of responses sent to the neighbor mesh
access points.
Parent Changes The number of times a mesh access point (child)
moves to another parent.
Neighbor Timeouts The number of neighbor timeouts.
Node Hops The number of hops between the MAP and the
RAP. Click the value link to display a sub-panel
which enables you to configure details of what is
reported, how often the node hop value is updated,
and view a graphical representation of the report.
Table 26 Queue Mesh Statistics
Parameter Description
Silver Queue The average and peak number of packets waiting
in the silver (best effort) queue during the defined
statistics time interval. Packets dropped and
queue size is also summarized.
Gold Queue The average and peak number of packets waiting
in the gold (video) queue during the defined
statistics time interval. Packets dropped and
queue size is also summarized.
Table 25 Bridging Mesh Statistics (continued)
Parameter Description