Design Guide

166
Cisco Aironet 1520, 1130, 1240 Series Wireless Mesh Access Points, Design and Deployment Guide, Release 6.0
OL-20213-01
Adding and Managing Mesh Access Points with Cisco WCS
Step 2 Click the Map Name that corresponds to the outdoor area, campus, building, or floor you want to
monitor.
Step 3 To view detailed information on mesh links for a mesh access point, click the arrow portion of the access
point label. The Access Points screen appears.
Step 4 Click the Mesh Links tab (see Figure 100).
Figure 100 Access Points > Mesh Links Panel
Note You can also mesh link details for neighbors of a selected mesh access point by clicking on the View
Mesh Neighbors link on the mesh access point configuration summary panel that displays when you
mouse over a mesh access point on a map. (See Figure 101.)
Note Signal-to-noise (SNR) only appears on the View Mesh Neighbors panel. (See Figure 101.)