Design Guide

134
Cisco Aironet 1520, 1130, 1240 Series Wireless Mesh Access Points, Design and Deployment Guide, Release 6.0
OL-20213-01
Troubleshooting
Neighbor MAC Address 00:17:94:FE:C3:5F
Total Packets transmitted: 0
Total Packets transmitted successfully: 0
Total Packets retried for transmission: 0
Note Packet error rate percentage = 1 – (number of successfully transmitted packets/number of
total packets transmitted).
Troubleshooting
This section provides troubleshooting information.
Installation and Connections
1. Connect the mesh access point that you want to be the RAP to the controller.
2. Deploy the radios (MAPs) at the desired locations.
3. Using the CLI, enter the command, show mesh ap summary to see all MAPs and RAPs on the
controller. (See Figure 82.)
Figure 82 Show Mesh AP summary
1.
From the controller GUI, click Wireless to see the mesh access point (RAP and MAP) summary.
(See Figure 83.)