Installation Guide

Americas Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Regulatory Compliance and Safety Information

for the Cisco 5915 Embedded Services Router

Read this document before installing or servicing the Cisco 5915 Embedded Services Router (ESR).

Warning

IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you

work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar

with standard practices for preventing accidents. Use the statement number provided at the end of

each warning to locate its translation in the translated safety warnings that accompanied this device.

Statement 1071

SAVE THESE INSTRUCTIONS

This document includes the following sections:

• Translated Safety Warnings, page 1

• Statement 2019—FCC Declaration of Conformity Information (for USA only), page 2

• Statement 8000—Standards Compliance, page 2

• EMC Class A Notices and Warnings, page 4

–

Statement 2017—Class A Notice for FCC, page 4

• Obtaining Documentation and Submitting a Service Request, page 4

Translated Safety Warnings

This section includes translations in multiple languages of the warnings that may appear in your product

documents.

PAGE 1
Regulatory Compliance and Safety Information for the Cisco 5915 Embedded Services Router Read this document before installing or servicing the Cisco 5915 Embedded Services Router (ESR). Warning IMPORTANT SAFETY INSTRUCTIONS This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents.
PAGE 2
Statement 8000—Standards Compliance Statement 2019—FCC Declaration of Conformity Information (for USA only) Product Cisco 5915 Embedded Services Router (ESR) This equipment is designed to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. This equipment is designed to generate, use and radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 3
Statement 8000—Standards Compliance Table 1 Standards Compliance Specification Description Safety UL 60950-1 CAN/CSA-C22.2 No.
PAGE 4
EMC Class A Notices and Warnings EMC Class A Notices and Warnings This section includes the EMC Class A warnings for the Cisco 5915 ESR. Statement 2017—Class A Notice for FCC Modifying the equipment without Cisco’s authorization may result in the equipment no longer complying with FCC requirements for Class A digital devices.