Manual

© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco/Verizon Public Information. Page 13 of 26
mobile-network Loopback100
mobile-network Vlan1
register retransmit initial 2000 maximum 2000 retry 2
register extend expire 40 retry 10 interval 4
register lifetime 181
reverse-tunnel
tunnel mode gre
no multi-path
!
ip access-list extended CS3
permit ip host 10.250.1.12 any
ip access-list extended CS4
permit ip host 10.250.1.10 any
ip access-list extended CS5
permit ip host 10.250.1.11 any
!
access-list 105 permit udp any any eq mobile-ip
!
alias exec spc show policy-map interface cell 0/0/0 out
alias exec sic show interface cell 0/0/0
alias exec siv show interface vlan1
alias exec spv show policy-map interface vlan1 in
!
line con 0
exec-timeout 0 0
login local
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport output lat pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line 0/0/0
script dialer LTE
modem InOut
no exec
transport input telnet
line vty 0 4
exec-timeout 0 0
privilege level 15
login local
transport input telnet ssh
!
end
*** Note that the ingress QoS policy on VLAN1 (BCPS-IN) is configured to re-mark traffic for QoS lab testing. For
an organization’s production configuration, there may be no policy (marking may be done by trusted devices or
LAN switches) or a policy that integrates with an organization’s existing QoS design.