Text Part Number: 78-10809-01 Release Notes for Cisco IOS Release 12.0(7)XK1 Feature Packs for Cisco 2600 Series Routers March 20, 2000 These release notes describe Cisco IOS Release 12.0(7)XK1 feature packs for Cisco 2600 series routers. Use them with the documents listed in the “Related Documentation” section on page 23.
How to Use These Release Notes How to Use These Release Notes Use Table 1, “Cisco 2600 Series Default Memory and Upgrade Options,” to find the factory-default memory and available upgrades for your router. Use Table 3, “Feature Pack Product Numbers,” to identify the software image to load. Use Table 4, “Cisco 2600 Series Feature Pack Image Filenames and Memory Requirements,” to find the memory required for this image.
Memory Options Memory Options Table 1 describes default memory and upgrade options for Cisco 2600 series.
Routers and Interfaces Supported Table 2 Interfaces Supported on Cisco 2600 Series Routers (continued) Interface, Network Module, or Data Rate1 Routers Supported Multiport T1/E1 ATM Network Modules with Inverse Multiplexing over ATM (IMA)3 4-port T1 ATM network module with IMA (NM-4T1-IMA[=]) All Cisco 2600 series routers 4-port E1 ATM network module with IMA (NM-4E1-IMA[=]) All Cisco 2600 series routers 8-port T1 ATM network module with IMA (NM-8T1-IMA[=]) All Cisco 2600 series routers Digital
Routers and Interfaces Supported Table 2 Interfaces Supported on Cisco 2600 Series Routers (continued) Interface, Network Module, or Data Rate1 Routers Supported Dial, ISDN, and Channelized Serial Network Modules 1- or 2-port channelized T1/ISDN PRI All Cisco 2600 series routers 1- or 2-port channelized T1/ISDN PRI with CSU All Cisco 2600 series routers 1- or 2-port channelized E1/ISDN PRI balanced All Cisco 2600 series routers 1- or 2-port channelized E1/ISDN PRI unbalanced All Cisco 2600 seri
Software Compatibility Software Compatibility The feature packs described in these release notes contain Cisco IOS Release 12.0(7)XK1 software images, some earlier images, and RSL Version 7.6. Before running RSL, read the “Installing Software Images Using RSL” section on page 17. Determining Your Software Release To determine the version of Cisco IOS software that is currently running on your Cisco 2600 series router, enter the show version command.
Feature Pack Overview Table 3 Feature Pack Product Numbers (continued) Product Number Feature Pack Description CD26-AK2-12.0.7= Cisco 2600 Enterprise Plus IPSec 3DES Feature Pack1 2 CD26-AHL-12.0.7= Cisco 2600 Enterprise/FW Plus IPSec 56 Feature Pack1 2 CD26-E-12.0.7= Cisco 2600 Remote Access Server Feature Pack 1 2 FW means firewall. This feature pack contains encryption images.
Feature Pack Overview Table 4 Cisco 2600 Series Feature Pack Image Filenames and Memory Requirements (continued) Flash Memory Required Main Memory Required Product Number CD-ROM Title UNIX Image Name DOS Image Name CD26-CP-12.0.7= Cisco 2600 IP Plus Feature Pack Release 12.0(7)XK1 RSL Version 7.6 c2600-is-mz.120-7.XK1 aaa1316 16 MB 40 MB Cisco 2600 IOS IP Plus Feature Set 12.0(7)XK1 c2600-is-mz.120-7.T aaa1317 8 MB 32 MB Cisco 2600 IOS IP Plus Feature Set 12.0(7)T c2600-is-mz.
Feature Pack Overview Table 4 Cisco 2600 Series Feature Pack Image Filenames and Memory Requirements (continued) DOS Image Name Flash Memory Required Main Memory Required aaa1330 16 MB 40 MB Cisco 2600 IOS IP Plus IPSec 56 Feature Set 12.0(7)XK1 aaa1331 8 MB 40 MB Cisco 2600 IOS IP Plus IPSec 56 Feature Set 12.0(7)T c2600-is56i-mz.120-8 aaa1332 8 MB 32 MB Cisco 2600 IOS IP Plus IPSec 56 Feature Set 12.0(8) c2600-is56i-mz-120-5.
Feature Pack Overview Table 4 Cisco 2600 Series Feature Pack Image Filenames and Memory Requirements (continued) Flash Memory Required Main Memory Required RSL Installer Description Product Number CD-ROM Title CD26-BHP-12.0.7= c2600-do3s-mz.120-7.XK1 Cisco 2600 IP/IPX/AT/DEC/ FW Plus Feature Pack c2600-do3s-mz.120-7.T Release 12.0(7)XK1 RSL Version 7.6 aaa1345 16 MB 48 MB Cisco 2600 IOS IP/IPX/AT/FW Plus Feature Set 12.
Feature Pack Overview Table 4 Cisco 2600 Series Feature Pack Image Filenames and Memory Requirements (continued) Flash Memory Required Main Memory Required RSL Installer Description Product Number CD-ROM Title CD26-AHK2-12.0.7= c2600-jk2o3s-mz.120-7.XK1 Cisco 2600 Enterprise/FW Plus IPSec 3DES Feature Pack Release 12.0(7)XK1 c2600-jk2o3s-mz.120-7.T RSL Version 7.6 aaa1358 16 MB 48 MB Cisco 2600 IOS Enterprise/FW Plus IPSec 3DES Feature Set 12.
Features by Feature Set Table 4 Cisco 2600 Series Feature Pack Image Filenames and Memory Requirements (continued) DOS Image Name Flash Memory Required Main Memory Required aaa1367 8 MB 24 MB Cisco 2600 IOS Remote Access Server Feature Set 12.0(7)XK1 aaa1368 8 MB 20 MB Cisco 2600 IOS Remote Access Server Feature Set 12.0(7) c2600-c-mz.120-8 aaa1369 4 MB 20 MB Cisco 2600 IOS Remote Access Server Feature Set 12.0(8) c2600-c-mz.120-5.
Features by Feature Set Table 5 Features by Feature Set for Cisco 2600 Series, Part 1 of 2 Feature Set IP Plus IPSec 56 IP FW IP FW Plus IPSec 3DES IP FW Plus IPSec 56 IP IPX AT DEC IP IPX AT DEC Plus IP IPX AT DEC FW Plus First IP IP Plus IP Plus IPSec 3DES Voice over Frame Relay Enhancements (7)XK No Yes Yes Yes Yes Yes Yes No Yes Yes Voice Port Enhancements (7)XK No Yes Yes Yes Yes Yes Yes No Yes Yes Voice Port Testing (7)XK No Yes Yes Yes Yes Yes Yes No Ye
Features by Feature Set Table 5 Features by Feature Set for Cisco 2600 Series, Part 1 of 2 (continued) Feature Set IP Plus IPSec 56 IP FW IP FW Plus IPSec 3DES IP FW Plus IPSec 56 IP IPX AT DEC IP IPX AT DEC Plus IP IPX AT DEC FW Plus First IP IP Plus IP Plus IPSec 3DES (1) No Yes Yes No Yes Yes Yes No Yes Yes BRI Voice over IP: VIC-2BRI-S/T-TE1 (3) No Yes Yes Yes No Yes Yes No Yes Yes Voice over Frame Relay, FRF.11 and FRF.
Features by Feature Set Table 6 Features by Feature Set for Cisco 2600 Series, Part 2 of 2 Feature Set First Enterprise Plus Enterprise Plus IPSec 56 Enterprise FW Plus IPSec 56 Enterprise Plus IPSec 3DES1 Enterprise FW Plus IPSec 3DES2 Voice over Frame Relay Enhancements (7)XK Yes Yes Yes Yes Yes Voice Port Enhancements (7)XK No Yes No Yes Yes Voice Port Testing (7)XK Yes Yes Yes Yes Yes Q.
Features by Feature Set Table 6 Features by Feature Set for Cisco 2600 Series, Part 2 of 2 (continued) Feature Set First Enterprise Plus Enterprise Plus IPSec 56 Enterprise FW Plus IPSec 56 Enterprise Plus IPSec 3DES1 Enterprise FW Plus IPSec 3DES2 BRI Voice over IP: VIC-2BRI-S/T-TE2 (3) Yes Yes Yes Yes Yes Voice Over Frame Relay, FRF.11 and FRF.
Installation Notes Installation Notes This section describes the following topics: • • Installing Software Images Using RSL, page 17 Alternatives to RSL, page 18 Installing Software Images Using RSL This section describes some solutions to problems you might encounter when installing software images using the RSL. These solutions are additions to the RSL online help.
Installation Notes Note In the previous situation, the router configuration register (config-register 0xnnnn) is not restored. Note If you press Ctrl-Alt-Delete to terminate the RSL, the router configuration and configuration register are not restored. However, in this case, the configuration file is not deleted from the PC, so you can restore it using the previous steps, beginning with Step 2.
Alternatives to RSL The following example shows how to use the copy xmodem flash command on a Cisco 2600 series router. Router# copy xmodem flash **** WARNING **** x/ymodem is a slow transfer protocol limited to the current speed settings of the auxiliary/console ports. The use of the auxiliary port for this download is strongly recommended. During the course of the download no exec input/output will be available.
Installation Notes Note To use an rcp application, follow the procedure below, substituting “rcp” for “TFTP”and using the copy rcp flash command instead of the copy tftp flash command. Step 1 Install any TFTP server application on the PC. (A PC application is included on the feature pack CD-ROM for Microsoft Windows 95 only.) Step 2 Launch the TFTP server application on the PC, usually by double-clicking the application icon or its .exe filename.
Alternatives to RSL When asked whether the system configuration has been modified, enter yes: Step 7 # System configuration has been modified. Save? yes If the password prompt appears, enter the password. Step 8 Password: At the router prompt, enter enable and then the password: Step 9 Router(boot)> enable Password: Step 10 If you are not upgrading a CiscoPro CPA1600 router, skip to Step 19.
Installation Notes If the file is still not found, create a temporary directory entitled “C:\temp,” and copy the CiscoPro upgrade file into the directory. Select the C:\temp directory as the root directory. Step 15 When asked whether you want to erase the existing image in the router Flash memory before copying the new one, enter yes: Erase flash device before writing? [confirm] yes The entire copying process takes several minutes and differs from network to network.
Related Documentation Step 23 Enter yes in response to the prompt asking if you want to erase the existing image copy resident in the router Flash memory before copying the new one. Erase flash device before writing? [confirm] yes The entire copying process takes several minutes and differs from network to network. The exclamation point (!) indicates that the copy process is taking place. Each exclamation point (!) indicates that ten packets have been transferred successfully.
Related Documentation Release-Specific Documents The following documents are specific to Cisco IOS Releases 12.0 T and 12.0, on which Release 12.0(7)XK1 is based. They are located on CCO and the Documentation CD-ROM: • Release Notes for Cisco IOS Release 12.0 T To access the cross-platform Release Notes for Cisco IOS Release 12.0 T on CCO, follow this path: Service and Support > Technical Documents > Documentation Home Page > Cisco IOS Software Configuration > Cisco IOS Release 12.
Platform-Specific Documents Platform-Specific Documents The documents listed below are available for the Cisco 2600. These documents are also available online at Cisco Connection Online (CCO) and on the Documentation CD-ROM.
Related Documentation Cisco IOS Documentation Set The Cisco IOS software documentation set consists of the Cisco IOS configuration guides, Cisco IOS command references, and several other supporting documents, which are shipped with your order in electronic form on the Documentation CD-ROM—unless you specifically ordered the printed versions. Documentation Modules Each module in the Cisco IOS documentation set consists of two books: a configuration guide and a corresponding command reference.
Cisco IOS Documentation Set Table 7 Cisco IOS Software Release 12.
Related Documentation Table 7 Cisco IOS Software Release 12.
Service and Support Service and Support For service and support for a product purchased from a reseller, contact the reseller, who offers a wide variety of Cisco service and support programs described in “Service and Support” of Cisco Information Packet shipped with your product. Note If you purchased your product from a reseller, you can access CCO as a guest. CCO is Cisco Systems’ primary real-time support channel. Your reseller offers programs that include direct access to CCO services.
Obtaining Technical Assistance Obtaining Technical Assistance Cisco provides Cisco Connection Online (CCO) as a starting point for all technical assistance. Warranty or maintenance contract customers can use the Technical Assistance Center. All customers can submit technical feedback on Cisco documentation using the web, e-mail, a self-addressed stamped response card included in many printed docs, or by sending mail to Cisco.
Technical Assistance Center Technical Assistance Center The Cisco Technical Assistance Center (TAC) is available to warranty or maintenance contract customers who need technical assistance with a Cisco product that is under warranty or covered by a maintenance contract. To display the TAC web site that includes links to technical support information and software upgrades and for requesting TAC support, use www.cisco.com/techsupport.
Obtaining Technical Assistance 32 Release Notes for Cisco IOS Release 12.
