User manual
32 Boson NetSim User Manual
10. To add additional labs to the lab pack section, repeat steps 5 through 9 until the lab pack section
is complete.
11. You can edit, add, delete, import, and export lab packs, sections, and labs by right-clicking a lab
pack or section.
Consoles Panel
After you have opened a lab from the Labs panel, you can view the device consoles on this panel and
begin performing the lab steps. You will see the console window, the device tabs, and two available
buttons: Settings and SDM.
Note: If you previously minimized or maximized the Home panel, the Consoles panel might not be
visible. To ensure that you can see the available device consoles, click the arrow next to Con
soles or click and drag the splitter control between the Home panel and the Consoles panel.
Console Window
From the console window, you can modify the devices and perform the steps in the instructions. The
devices in the lab can be accessed from the drop-down list box at the top of the panel or from the lower
tab menu. Select a specic device to begin performing the lab steps on that device.