User manual

31 Boson NetSim User Manual
5. Right-click the new section you just created, and click Add New Lab.
6. Type a name in the Name eld under Lab, and add a description if desired.
7. Click the Add File
button to add les to the lab; supported le extensions are *.top (topology;
required le), *.xps (instructions; required le), and *.nwc (device conguration; optional les).
First add the *.top le, then add the *.xps le. The *.nwc les are optional and can be added next
if desired; after adding *.nwc les, select the le type from the File Type drop-down list box.
Note: A topology le and instruction le are required. Only one document le, one loading
conguration le, and one grading conguration le can be added to a single lab.
8. Continue adding les until your lab is complete.
9. Click Save to save the lab.