User manual

26 Boson NetSim User Manual
Frame Relay Connections
To create a Frame Relay connection, perform the following steps:
1. Add routers to the topology; the routers that will be included in the Frame Relay connection
must have Serial interfaces.
2. Right-click one of the routers to be included in the connection, and select New Connection.
3. Select Serial as the interface type, and select Frame Relay.
4. Click Connect.
5. In the Frame Relay dialog box, type a name for the Frame Relay node in the Name eld.
6. Select an option from the Number of Nodes; the number represents the number of routers
that will participate in the Frame Relay connection).