Technical information

13
Release Notes for Cisco Aironet 350 and CB20A Client Adapter Install Wizard 1.5 for Windows
OL-6553-01
Installing or Upgrading Client Adapter Software
Menu Options (Defaults) Determines which options are displayed on the ACM pop-up menu.
Menu options: About Box (Help), Exit Program, Launch Aironet
Client Utility, Troubleshooting, Turn Radio On/Off,
Reauthenticate, Select Profile, Show Connection
Status
Options per menu option: Show or Hide
Default per menu option: Show
Security Modules
LEAP Installs the LEAP supplicant included in the Install Wizard file.
Installing the LEAP supplicant enables you to create a profile in ACU
that uses LEAP authentication. If this option is not selected now and
you later want to create a profile that uses LEAP, you must run this
installation program again and choose this option.
Default: Checked
Note If you choose LEAP on a Windows XP device, Windows XP’s
fast user switching feature is disabled.
Allow Saved LEAP
User Name and
Password
Enables you to create a profile in ACU that uses a saved (rather than
temporary) username and password for LEAP authentication. When
such a profile is selected, the saved username and password are used
to start the LEAP authentication process, and you are not prompted to
enter them.
Options: Yes or No
Default: Yes
EAP-SIM Installs the EAP-SIM supplicant included in the Install Wizard file.
Installing the EAP-SIM supplicant enables the client to support
EAP-SIM authentication. If this option is not selected now and you
later want to use EAP-SIM, you must run this installation program
again and choose this option.
Default: Unchecked
Note To enable EAP-SIM authentication, your computer must run
Windows 2000 with the Microsoft 802.1X supplicant
installed or Windows XP.
Note If you installed the new EAP-SIM supplicant from Cisco.com
(see the “New EAP-SIM Supplicant Available” section on
page 5), make sure the EAP-SIM option is not selected.
Otherwise, the EAP-SIM supplicant included in the Install
Wizard file overwrites the new supplicant’s settings.
Table 1 Software Components and Their Parameters (continued)
Component or Parameter Description