Technical information

12
Release Notes for Cisco Aironet 350 and CB20A Client Adapter Install Wizard 1.5 for Windows
OL-6553-01
Installing or Upgrading Client Adapter Software
Program Feature Overrides Determines which ACM components are enabled. If any components
are not selected now and you later want to use them, you must run this
installation program again and enable them.
Components: See the table below
Options per component: Enable or Disable
Default per component: Enable
Component Description
About Box (Help) Displays the ACM version number and
enables you to access the online help.
Exit Program Closes ACM for all client adapters.
Launch Aironet Client
Utility
Activates ACU, if it is installed.
Troubleshooting Activates the troubleshooting utility,
which enables you to identify and resolve
configuration and association problems
with your client adapter.
Preferences Enables you to determine when ACM runs
and to select the options that appear on the
ACM pop-up menu.
Turn Radio On/Off Turns the client adapter’s radio on or off.
Reauthenticate Forces your client adapter to try to
reauthenticate using the username and
password of the current profile.
Select Profile Enables you to select the active profile for
your client adapter.
Auto Profile Selection Causes the client adapter’s driver to
automatically select a profile from the list
of profiles that were set up in ACU to be
included in auto profile selection.
Other Configuration
Application
Enables an application other than ACU to
configure the client adapter.
Show Connection Status Provides information on the current status
of your client adapter.
Table 1 Software Components and Their Parameters (continued)
Component or Parameter Description