User guide

http://<CE500_Management_IP_Address> . For example, http://172.16.100.100.
Note: Once the initial configuration is complete, the switch can be managed through any switchport
that is configured for the same VLAN as that of the management IP address.
Smartports
Smartport Roles
The Smartports are preconfigured switch ports that provide preset Cisco recommended network
enhancements, Quality of Service (QoS) and security. Catalyst Express 500 series switches have a number of
Smartport roles. Each port role is just a configuration template. With these templates, users can consistently
and reliably configure essential security, availably, and QoS features with minimal effort and expertise.
Smartport roles simplify the configuration of critical features.
The port roles are based on the type of devices to be connected to the switch ports. For example, the Desktop
port role is specifically for the switch ports that are connected to desktop or laptop PCs.
Smartport Role
Description
Desktop
Apply this role to ports that are connected to
desktop devices, such as desktop PCs,
workstations, notebook PCs, and other
client−based hosts.
Optimized for desktop connectivity•
Configurable VLAN setting•
Port security enabled to limit
unauthorized access to the network
•
Switch
Apply this role to ports that are connected to
other switches.
Configured as an uplink port to a
backbone switch for fast convergence
•
Enables 802.1Q trunking•
Configurable native VLAN•
Router
Apply this role to ports that are connected to
WAN devices that connect to the Internet,
such as routers and Layer 3 switches with
routing service capabilities, firewalls, or VPN
Concentrators.
Configured for optimal connection to
a router or firewall for WAN
connectivity
•
Enables 802.1Q trunking•
Configurable native VLAN•
IP
Phone+Desktop
Apply this role to ports that are connected to
IP phones.
A desktop device, such as a PC, can be
connected to the IP phone. Both the IP phone