User guide

Note: If you have any ports with the IP Phone+Desktop role, you must create the Cisco−Voice
VLAN. If you have any ports with the Guest port role, you must create the Cisco−Guest VLAN. If
you create VLANs without Cisco−Voice and Cisco−Guest VLANs and you click Submit, this error
message appears.
Complete these steps to delete VLAN(s):
Check the check box at the top of the Delete column to select all VLANs or check the check box for
one or more specific VLANs.
1.
Click Submit to save your changes. Click OK in the Delete VLAN confirmation pop−up window.2.
Change VLAN Memberships
Specific VLAN memberships can be changed for the ports part of these Smartport roles:
Native VLANSwitch, Router, and Access Point•
Access VLANDesktop, IP Phone+Desktop, Server, Printer, Guest, and Other
Note: Access VLAN for the Guest role should be Cisco−Guest VLAN.
•
Voice VLANIP Phone+Desktop. Voice VLAN should be only the Cisco−Voice VLAN.•
Use the Smartports Customize window to assign ports to VLANs. Select Configure > Smartports from the
Device Manager menu to display this window.
Click Customize on the Smartports window.1.