System information

Chapter 3 Initially Configuring the ATM Switch Router
Testing the Configuration
3-40
ATM Switch Router Software Configuration Guide
78-6277-03, Cisco IOS Release 12.0(13)W5(19)
Use the show atm vc interface card/subcard/port command to confirm the status of ATM virtual
channels on a specific interface:
Switch# show atm vc interface atm 3/0/0
Interface VPI VCI Type X-Interface X-VPI X-VCI Encap Status
ATM3/0/0 0 5 PVC ATM0 0 56 QSAAL UP
ATM3/0/0 0 16 PVC ATM0 0 36 ILMI UP
ATM3/0/0 0 18 PVC ATM0 0 85 PNNI UP
ATM3/0/0 50 100 PVC ATM3/0/1 60 200 DOWN
ATM3/0/2 70 210 UP
ATM3/0/3 80 220 UP
ATM3/0/0 100 200 SoftVC NOT CONNECTED
Use the show atm vc interface atm card/subcard/port vpi vci command to confirm the status of a specific
ATM interface and virtual channel.
Switch# show atm vc interface atm 0/0/0 0 16
Interface: ATM0/0/0, Type: oc3suni
VPI = 0 VCI = 16
Status: DOWN
Time-since-last-status-change: 1w5d
Connection-type: PVC
Cast-type: point-to-point
Packet-discard-option: enabled
Usage-Parameter-Control (UPC): pass
Wrr weight: 15
Number of OAM-configured connections: 0
OAM-configuration: disabled
OAM-states: Not-applicable
Cross-connect-interface: ATM0, Type: Unknown
Cross-connect-VPI = 0
Cross-connect-VCI = 35
Cross-connect-UPC: pass
Cross-connect OAM-configuration: disabled
Cross-connect OAM-state: Not-applicable
Encapsulation: AAL5ILMI
Threshold Group: 6, Cells queued: 0
Rx cells: 0, Tx cells: 0
Tx Clp0:0, Tx Clp1: 0
Rx Clp0:0, Rx Clp1: 0
Rx Upc Violations:0, Rx cell drops:0
Rx pkts:0, Rx pkt drops:0
Rx connection-traffic-table-index: 3
Rx service-category: VBR-RT (Realtime Variable Bit Rate)
Rx pcr-clp01: 424
Rx scr-clp01: 424
Rx mcr-clp01: none
Rx cdvt: 1024 (from default for interface)
Rx mbs: 50
Tx connection-traffic-table-index: 3
Tx service-category: VBR-RT (Realtime Variable Bit Rate)
Tx pcr-clp01: 424
Tx scr-clp01: 424
Tx mcr-clp01: none
Tx cdvt: none
Tx mbs: 50