Specifications

Core Layer April 2014
102
macro apply EgressQoS
channel-protocol lacp
channel-group [number] mode active
logging event link-status
logging event trunk-status
logging event bundle-status
no shutdown
Step 4: Save the running configuration that you have entered so it will be used as the startup configuration file
when your switch is reloaded or power-cycled.
copy running-config startup-config
Example: Core to distribution port-channel configuration—EIGRP
2110
Port channel
CoreDistribution
interface Port-channel 30
description EtherChannel Link to Distribution Switch
no switchport
ip address 10.4.40.9 255.255.255.252
ip pim sparse-mode
no shutdown
!
interface range FortyGigabitEthernet 1/3/1, FortyGigabitEthernet 1/3/3,
FortyGigabitEthernet 2/3/1, FortyGigabitEthernet 2/3/3
description EtherChannel Link to Distribution Switch
no switchport
macro apply EgressQoS
carrier-delay msec 0
channel-group 30 mode active
logging event link-status
logging event trunk-status
logging event bundle-status
no shutdown
!
key chain CAMPUS-KEY
key 1
key-string [key]
router eigrp CAMPUS
!
address-family ipv4 unicast autonomous-system 100
!
af-interface default
authentication mode md5
authentication key-chain CAMPUS-KEY