Specifications

2-5
Catalyst 4224 Access Gateway Switch Software Configuration Guide
OL-2031-02
Chapter 2 Configuring for the First Time
Using the Cisco IOS CLI
Figure 2-1 Catalyst 4224 Front Panel
Using the Cisco IOS CLI
Cisco voice gateways run versions of Cisco IOS software that includes
specialized adaptations for Voice over IP (VoIP) and Media Gateway Control
Protocol (MGCP). If you are familiar with other versions of Cisco IOS, you will
find configuring Cisco voice gateways straightforward because you will use the
Cisco IOS CLI, with which you are familiar.
If you have never used the Cisco IOS CLI, you should still be able to perform the
configuration required using the instructions and examples provided in this guide.
To help get you started, this section provides a brief overview of some of the main
features of the CLI. For further information, refer to the Cisco IOS configuration
guides and command references for details about specific commands.
This section contains the following topics:
• Getting Help, page 2-6
• Command Modes, page 2-6
• Disabling a Command or Feature, page 2-8
• Saving Configuration Changes, page 2-8
STATUS
ACCESS GATEWAY SWITCH
STATUS
HDA
PS
RPS
VW
IC
1
V
W
IC
2
VIC 3
12 3456 78
910111213141516
CONSOLE
17 18 19 20 21 22 23 24
55803
10/100 Ethernet (slot 5)
Status LED
VWIC
(slots 1 and 2)
VIC
(slot 3)
Switch
utilization
8-Port RJ21 FXS
(slot 4)
10/100 Mgt port
CATALYST 4224
04
15
26
37
WS-U4604-8FXS